Barn style interior doors – Measure the width and the height of the door space with tape measure to determine the amount of rammen.Markere the height and width of the door frame to the 2-by-4 plader.Skær 2-by-4 boards in accordance with the measurements you are marked with an sav.Hvice you need a heavier frame, cut two matching pieces for each side of the door frame and stack and nail them semen.
The lay out the frame on a flat, solid overflade.Kontroller whether the pieces are even with a vaterpas.Nail the frame with a nail gun. Nail or screw metal braces across the corners of rammen.Dette will strengthen the framework and make it more robust. Measure the width and height of your new frame to determine the length and number of planks, you want to use for the barn drone. Lay cut 4-by-1 boards on rammen.Se if they just use it vaterpas.Når you are sure of the location, use wood glue on the inside of the door frame where the 4-by-1 door boards will be attached. Then place the barn style interior doors boards and nail them in the frame.
12 Photos Gallery of: Build Rolling Barn Style Interior Doors
Put sliding track top dørkarmen.Sporet be placed on the back of the barn døren.Mark where the tracks will be knyttet.Brug a spirit level to ensure that the mark is lige.Skru metal tracks on the frame. Arrange track wheels on the bottom of the frame and mark their placering.Skrue track wheels to the bottom of the frame. Attach the other sliding door track to the barn væg.Placeringen of the track must match the track on døren.Brug a level to ensure that the tracks are endnu.Før mounting the track on the wall, check the location with vaterpas.Når you are sure on, nail or screw the tracks to the barn walls. Your barn style interior doors done.